Replacing The Product Hose Or Air Hose - WAGNER GM 4700AC Original Operating Manual

VERSION 06/2018

8.2.4 REPLACING THE PRODUCT HOSE OR AIR HOSE

1. Flush and clean the spray gun in accordance with Chapter 8.1.2.
2. Relieve the pressure of the spray gun and device.
3. Secure the spray gun with the trigger locking device.
Product hose
4. Place the size A open-end wrench on the upper part of the product connection and
hold it in place.
5. Unscrew the product hose nut using the size B open-end wrench.
Air hose
4. Place the size D open-end wrench on the upper part of the air connection and hold
it in place.
5. Loosen the air hose's nut with a size C open-end wrench.
Assembly:
6. Screw on the product hose or air hose by hand and tighten with the two open-end
wrenches.
A
B
Description
GM 4700AC with NPS1/4" filter
ORDER NUMBER DOC2311730
B_02385
Wrench A
19 mm
0.75 inch
D
C
P_02386
Wrench B Wrench C
19 mm
0.75 inch 0.67 inch
Note:
Do not unscrew the
filter connection.
The filter connection
should be replaced
in accordance with
Chapter 10.8.
Wrench D
17 mm 17 mm
0.67 inch
30