VERSION 02/2019
8.2.4 REPLACING THE PRODUCT HOSE OR AIR HOSE
1. Flush and clean the spray gun in accordance with Chapter 8.1.3.
2. Relieve the pressure of the spray gun and device.
Product hose
4. Place the size A wrench on the upper part of the product connection and hold it in
place.
5. Unscrew the product hose nut using the size B wrench.
Air hose
4. Place the size D wrench on the air connection and hold it in place.
5. Unscrew the air hose nut using the size C wrench.
Assembly:
6. Fit product hose and/or air hose by hand and tighten using two wrenches.
Counterhold
A
B
Description
Wrench size
16 mm; 0.62 inch
ORDER NUMBER DOC 2397374
Counterhold
Wrench A
Wrench B
19 mm; 0.75 inch
TOPFINISH GM 1030P
D
C
Wrench C
17 mm; 0.67 inch
Wrench D
14 mm; 0.55 inch
32