Replacing The Product Hose Or Air Hose - WAGNER AirCoat GM 4100 AC Operating Manual

VERSION 01/2018

8.2.4 REPLACING THE PRODUCT HOSE OR AIR HOSE

1. Flush and clean the spray gun in accordance with Chapter 8.1.2.
2. Relieve the pressure of the spray gun and device.
3. Secure the spray gun with the trigger locking device.
Product hose
4. Place the size A open-end wrench on the upper part of the product connection and
hold it in place.
5. Unscrew the product hose nut using the size B open-end wrench.
Air hose
4. Place the size D open-end wrench on the upper part of the air connection and hold
it in place.
5. Loosen the air hose's nut with a size C open-end wrench.
Assembly:
6. Screw on the product hose or air hose by hand and tighten with the two open-end
wrenches.
A
Counterhold
B
Description
GM 4100AC with NPS1/4" filter
ORDER NUMBER DOC 394821
Counterhold
B_02265
Wrench A
17 mm
0.67 inch
D
C
Note:
Do not unscrew the
product connection. The
upper securing nut may
only be unscrewed by
WAGNER- Service Station
personnel.
B_02266
Wrench B
19 mm
0.75 inch
Wrench C Wrench D
17 mm 14 mm
0.67 inch 0.55 inch
30