Update Firmware; Remove System Power; Table 1-5 Ocp Leds - HP AlphaServer ES80 Upgrade

1.4

Update Firmware

You must update your system to the latest firmware levels before you power down.
Firmware downloads are available online through an ftp site and also a web address. Two
sites are available, to address any firewall challenges.
Download the latest firmware from one of these two sites:
ftp://ftp.digital.com/pub/Digital/Alpha/firmware/index.html
http://ftp.digital.com/pub/Digital/Alpha/firmware/index.html
If you are adding at least one additional 2P drawer (upgrading from a Model 2
to Model 4, for example), then you MUST upgrade your firmware before you
power down your system and begin the hardware upgrades. You cannot
successfully upgrade the hardware without updating the firmware on your
original system.
Please save all console environmental variables before power down
(use or
show* show mbm
1.5

Remove System Power

Perform an orderly shutdown of the operating sytem.

Table 1-5 OCP LEDs

Amber Green
• •
LED LED
Off Off
On Off
Off On
On On
•
The top LED is amber and the bottom LED is green.
•
1-6 HP AlphaServer ES80 Upgrades
commands).
Indication
No Vaux
Vaux on, bulk power off, attention error inside the box
Vaux on, bulk power on, no errors
Vaux on, bulk power on, attention error inside the box