Fw Info (Firmware Information) Menu; System Info Menu - HP NetServer LH 6000 Installation Manual

All manuals and user guides at all-guides.com
Chapter 2

FW Info (Firmware Information) Menu

The FW Info menu displays the versions of all firmware components in the
system.
1. Select FW Info from the Main Menu.
A display similar to the one shown below appears on the HP NetServer's
front panel display.
**FW Info***
2. Use the arrow buttons to scroll down through the rest of the information.
3. Press Escape to return to the Main Menu.

System Info Menu

The System Info menu displays the HP NetServer's configuration information.
Information includes the number, speed, and type of CPUs, cache information,
and the amount of RAM on each memory board.
1. Select System Info from the Main Menu.
A display similar to this appears on the HP NetServer's status screen.
**System Info***
No. Of CPUs=x
2. Use the down-arrow button to scroll through the rest of the information.
A full screen of the display would appear as shown below, but the actual
display is still limited by two viewing lines at time.
**HW Sys Info***
No. Of CPUs=x
CPU speed 500MHz
CPU type PIII Xeon
LFT CPU1 stepping xx
LFT CPU2 stepping xx
RFT CPU1 stepping xx
RFT CPU2 stepping xx
L2 Cache xxxx KB
Mem slot1 xxxxMB
Mem slot2 xxxxMB
3. Press Escape to return to the Main Menu.
18
Controls, Ports, and Indicators