Cut Metho D72; Plot Center - Oce 9400-I User Manual

Cut method
This setting can be used to select standard cut or synchro cut (see 'Order of
standard sizes for using standard cut' on pag e138).
Use Synchro Cut when you must define a non-standard paper size in your
Note:
application.
The values selected for leading or trailing edge are taken into account when
using Synchro Cut.
Programming cut metho
Press 'Program' to enter the main menu.
1
Select '
2
Press 'next/select' to enter the '
3
Select the '
4
Press 'next/select' to enter the '
5
Select the '
6
Press 'next/select' to enter the '
7
Select the desired cut method usin
8
Press 'next/select' to confirm the selected cut method.
9
Press 'Program' to exit the main menu.
10

Plot Center

This setting can be used to enable or disable centering of the plot on the paper.
If the center setting is disabled, the plot will be positioned in the upper
left-hand corner of the page.
If Standard Cut is selected, the plot is printed and the media is cut according to
the standard cut functionality. If Plot Center in On, the plot is shifted up/down
and left/right so that it is centered within the selected bounding box.
If you print a plot that exceeds standard length, the machine
Note:
automatically switches to synchro cut to prevent you from losing information.
If Synchro Cut is selected, the bounding box of the plot sets hard clip limits. If
Plot Center is ON, the plot is shifted left/right so that it is centered on the page.
Programming Plot Cente
Press 'Program' to enter the main menu.
1
72 Océ 9400-II User Manual
' item using t
MEDIA SETTING
' item using t
PLOT POSITION
' item using the
CUT METHOD
he or button.
' menu.
MEDIA SETTING
he or button.
' menu.
PLOT POSITION
or button.
' menu.
CUT METHOD
g the or button.