Adjusting The Leading/Trailing Ed G E64 - Oce 9400-I User Manual

Adjusting the leading/trailing edge
You can increase the length of the copy to accommodate a filing strip, by
selecting a positive leading/trailing edge.
If you don't want the filing strip to show on the copy, you can remove it by
selecting a negative leading or trailing edge. The adjustment increments in
millimeters or inches appear on the operating panel.
Adjusting the leading/trailing edg
Press the edge' button to toggle between leading and trailing edge.
1
Press the up' or 'down' button to select the required leading/trailing edge
2
value. The length of the currently selected edge appears in the display.
If you use this button to make adjustments, the indicators above the button will
flash. If the adjustment differs from the default setting, the indicator will
remain on. Confirm the setting by pressing the zoom, edge, cut, media or start
buttons.
Attention:
of information
The method of adjusting the leading/trailing edge varies, depending on
whether you are using roll feed or manual feed (see 'Leading/trailing edge
when copying on rolls of paper' on pa ge65) and Leading/trailing edge when
copying onto a sheet of paper' on pag e66).
64 Océ 9400-II User Manual
Be aware that decreasing the edges too much may result in a loss