Scsi - Oce 9400-I User Manual

SCSI-2

If you are using the SCSI-2 port (for the scan-to-file option), you must
configure two parameters; the SCSI-2 ID and the terminator.
The SCSI-2 port is used only for the scan-to-file option, which allow you
Note:
to upload data from the controller to the connected PC.
Connecting SCSI-2
Turn off the printer and the host.
1
Connect one end of the SCSI-2 cable to the computer's SCSI-2 port.
2
Connect the other end to the printer's SCSI-2 port (see fi gure6).
3
[6] SCSI-2 port
Switch on the printer and the host.
4
Defining the SCSI-2 I
You can select a number between 0 and 7. The default is 0. Check the
configuration of your computer to find an ID that is not being used by anothe
device on the SCSI-2-bus to which you want to connect the Océ 9400-II.
Press 'Program' to enter the main menu.
1
Select the '
2
Press 'next/select' to enter the '
3
Select the 'C
4
Press 'next/select' to enter the '
5
Select the
6
Press 'next/select' to enter the SCSI-2 menu.
7
Installing the printer
SCSI
menu using th
'
CONFIGURATION
' menu using th
ONNECTIONS
item using the
SCSI-2
e or
menu.
'
CONFIGURATION
e or button.
' menu.
CONNECTION
or button.
button.
25