Copying Using Manual Fee D61 - Oce 9400-I User Manual

Copying using manual feed
If you want to copy a job on a media type and/or size that is not available on
the media rolls, you might prefer to feed the sheets manually instead of
changing the rolls. The sheet feeder is a special slot located just above the
paper roll drawers on the print engine. You can insert pre-cut copy media into
this slot, one sheet at a time. See also 'Printing using the manual feed' on
page 48.
Before using manual feed, you will have to program the media settings. See
'Programming media settings' on pag e49.
Selecting manual fee
Feed in the original, in portrait orientation.
1
Press the 'media' button until the manual feed indicator lights up.
2
Adjust other settings as required.
3
Press the 'start' button.
4
Wait for the'FEED SHEET' message in the printer display.
5
Feed in the copy material, in portrait orientation (minimum length 420 mm
6
[16.5"]).
Hold the paper until the engine pulls in the first part of the sheet.
7
Attention
curl facing down to avoid damaging the drum
If the copy job requires more sheets, the printer display will ask you to feed in
8
the next sheet.
To complete the job, repeat steps 5 to 8.
9
[24] Manually feeding in a sheet of paper
Copy jobs
If the sheets of copy material are curled, feed them in with th
61