Oce 9400-I User Manual page 26

Select the '
8
Press 'next/select' to enter the '
9
Select the required '
10
Press 'next/select' to confirm the selected '
11
Press 'Program' to exit the main menu.
12
Switch the printer off and then on again to activate the configured settings.
13
Defining the terminato
The termination should be set to 'ON' if the Océ 9400-II is the last device on
the SCSI-2 chain. It should be set to 'OFF' if it is placed between other devices.
Press 'Program' to enter the main menu.
1
Select the 'C
2
Press 'next/select' to enter the '
3
Select the 'C
4
Press 'next/select' to enter the '
5
Select the
6
Press 'next/select' to enter the SCSI-2 menu.
7
Select the '
8
Press 'next/select' to enter the '
9
Select '
10
Press 'next/select' to confirm the required selection.
11
Press 'Program' to exit the main menu.
12
Turn the printer off and then on again to activate the configured settings.
13
26 Océ 9400-II User Manual
' item using the
ID
' (a value from 0 to 7) using
ID
ONFIGURATION
' menu using th
ONNECTIONS
item using t
SCSI-2
' item using the
TERMINATION
/ ' using the
ON OFF
or button.
' menu.
ID
'.
ID
' menu using th e or
CONFIGURATION
e or
' menu.
CONNECTION
he or button.
or
' menu.
TERMINATION
o r button.
the or button.
button.
' menu.
button.
button.