Switching The Printer On/ Off20 - Oce 9400-I User Manual

Switching the printer on/of
Once the printer has been switched on, it is ready for operation.
Turning the printer o
Set the on/off switch, located at the back of the printer to position '1' (see
1
figur e4). If the electrical supply is correctly connected, the green switch will
light up.
[4] Printer on/off switch
When 'Ready' appears on the operating panel, the printer is ready for
Note:
use.
Turning the printer off
Set the on/off switch, located at the back of the printer to position '0' (see
2
figur e4).
Attention:
information or a paper jam.
20 Océ 9400-II User Manual
Switching off the printer during a print job may cause a loss o