Table of Contents
Advertisement
Interfaces
Centronics protocol
Centronics supports P1284-compatible and ECP modes.
SCSI-2 protocol
When the printer is attached to a SCSI-bus, it functions as a standard SCSI tape
device. SCSI tape commands are used to address the Océ 9400-II for upload.
Ethernet protocol
You can connect the printer to:
TCP/IP
NETBIOS (over TCP/IP).
Ethertalk/Novell can be supported by an optional external print server.
Note:
For more details, see 'Ethernet' on page
130
Océ 9400-II User Manual
Advertisement
Table of Contents
Troubleshooting
