Printing File S70 - Oce 9400-I User Manual

Printing files
The Océ 9400-II can be connected to a host environment, which may be either
a standalone PC/Workstation or a PC/Workstation connected to a network. It
accepts various standard format CAD/CAM vector and EDMS raster data files
from the host environment and converts these into high quality plots (see
figur e27).
[27] Data flow to the Océ 9400-II
When an Océ 9400-II receives vector (HP-GL, HP-GL/2, Calcomp 906/907),
raster (HP-RTL, TIFF, CALS) or PostScript (PostScript level 2 optional) data,
it generates a plot using the settings (e.g. number of copies, plotter emulation,
etc.) specified on the operator console in Program Mode.
For maximum flexibility, each plot job can be preceded by remote-control
commands specifying the settings to be used for that specific job. These
commands are contained in a 'header' containing job- and file-specific settings
(e.g. number of copies), in Remote Control Format (RCF), which override the
settings programmed in Program Mode.
70 Océ 9400-II User Manual
Job
Settings
Plotfile + RCF
Plot
File
Application
Software
Océ 9400-II
Plot