Selecting The Media Save R101 - Oce 9400-I User Manual

Selecting the media saver
The Océ 9400-II offers two options for optimizing usage of print media:
Nesting and Autoposition. This applies to both vector and raster formats. The
media saver can also be disabled.
The media saver is flushed in the following situations:
after a time-out
when a copy job interrupts the printing process
when selecting another roll or manual feed
by the flush media saver on the printer operating panel.
When automatic roll selection is used, the media saver is inactive.
Note:
The following settings must be specified before the media saver can be used:
cut methods = synchro
center = off
leading and trailing edge = 0.
Nesting
When nesting is selected, prints are stored in queues in the printer's memory,
according to their size: 8.5x11" or A, 11x17" or B, 17x22" or C, and mixed 11
x 17"/8.5 x 11". When the queue is full, the drawings are printed across the full
width of the media.
The minimum paper length is 16.5 inches. Therefore, when printing 11 x 17"
landscape or 8.5 x 11", an extra strip of white paper appears at the end.
If the print is larger than C size, it will not be stored in a queue but will be
printed normally. If prints are not standard ISO, ANSI or Architecture sizes,
the next larger format is used (see fig u re29 on p age102).
Selecting nestin
Press 'Program' to enter the main menu.
1
Select the 'C
2
Press 'next/select' to enter the 'C
3
Select the '
4
Press 'next/select' to enter the '
5
Advanced printer menu functions
' item using t
ONFIGURATION
' item using t
PLOT MANAGER
he or button.
' menu.
ONFIGURATION
he or button.
' menu.
PLOT MANAGER
101