Oce 9400-I User Manual page 111

Best fit Mode
In this mode, the drawing will be reduced to match either the length or the
width of the format loaded in the machine, with no loss of information (no
clipping). Only plots larger than the loaded media size are scaled or rotated; all
others are printed without scaling.
This mode does not enlarge drawings, but only reduces them.
Note:
This option cannot be used with the Nesting option. If Nesting is enabled, this
option will have no effect.
This mode prevents clipping of plots which are larger than the media loaded in
the machine.
If 'AUTOSCALE' is off and if your drawing is larger than the physical
dimensions of the media, the printer will automatically clip the area outside the
margins. The 'CLIPPING' message appears on the display, and the printer
automatically compensates for the discrepancy. Clipping does not affect the
position of the print origin.
[32] Print clipping
A: Only the left part of the drawing is plotted.
B: The part of the drawing outside the margins is clipped.
Defining autoscalin
Press 'Program' to enter the main menu.
1
Select the 'C
2
ONFIGURATION
Press 'next/select' to enter the 'C
3
Select the '
4
PLOT MANAGER
Advanced printer menu functions
A
' item using t he or
ONFIGURATION
' item using t he or
B
button.
' menu.
button.
111