Defining Pen Setti Ngs80 - Oce 9400-I User Manual

Defining pen settings
You can change the pen settings for the files you want to print in the pen menu.
The default width and pattern for each pen number can be changed in this
menu. These settings apply to all vector languages: HP-GL, HP-GL/2, and
CalComp.
Pen width can be defined from 0.08 up to 10.75 mm (0.0031" to 0.423"). All
pen widths are set to 0.25 mm (0.009") by default. Adjustments can be made
in increments of 0.01 mm.
A pen can be selected by the plot file to draw a line or to fill a polygon. All
lines or polygons on the plot can be drawn with a predefined pattern or shade
of gray. Pen pattern 16 is the default. The following pen patterns are available:
[28] Available pen patterns
Defining the pen setting
Press 'Program' to enter the main menu.
1
Select the 'C
2
Press 'next/select' to enter the 'C
3
Select the '
4
Press 'next/select' to enter the '
5
80 Océ 9400-II User Manual
white
' item using the
ONFIGURATION
' option using the
PEN MENU
or button.
' menu.
ONFIGURATION
or button.
'.
PEN MENU
black