Cutting The Paper To Get A Straight Leading Edge - Oce 9400-I User Manual

Cutting the paper to get a straight leading edge

If the paper does not have a straight leading edge, you can cut it off at right
angles from the roll.
Cutting the paper from roll 1 or roll
Open the drawer.
1
Feed the paper manually until it is approximately 5 cm above the top drawer.
2
Close the paper drawer.
3
Press 'Program' to enter the main menu.
4
Select the '
5
Press 'next/select' to enter the '
6
Select '
7
Press 'next/select' to cut the paper.
8
Open the paper drawer.
9
Remove the scrap of material.
10
Pull back the material until it is visible and positioned correctly (see figure13
11
on page 4 3 ).
Close the drawer.
12
Press the button 'Cancel/Continue'.
13
44 Océ 9400-II User Manual
MEDIA SETTINGS
' using the
CUT MEDIA
' item using t he or
MEDIA SETTINGS
o r button.
button.
' menu.