Setting Up Smb On Windows 95/98 And Nt - Oce 9400-I User Manual

Printing via SMB
The Océ 9400-II SMB supports printing for the following types of
workstations:
Windows 95/98
Windows NT 4.0.

Setting up SMB on Windows 95/98 and NT

Once the Océ 9400-II has been configured for printing via SMB, you can make
the Océ 9400-II available on Windows 95/98/NT. This involves the following
steps:
Enabling the Océ 9400-II on Windows 95/98 and NT
Log on to your workstation.
1
Double-click on the 'Network Neighborhood' icon on your Windows desktop.
2
Double-click on the workgroup to which the Océ 9400-II has been assigned.
3
Double-click on the device name for which the Océ 9400-II has been
4
configured.
The list of shared print queues appears.
Double-click on the desired queue, or
5
Right-click on the desired queue, and then click on Install.
Select OCE 9400-IIPS to be associated with the Océ PS driver.
Select OCE 9400-II to be associated with the Océ Windows Raster driver.
You will be prompted to provide the driver.
Default values:
Workgroup:OCE-PRINTERS
Device Name:P-xxxxxxxxxxxx, where xxx is the Ethernet address of your
printer (for example: P-08003E27E100).
Please contact your local service technician if you wish to modify these default
values.
Make sure that you do not have two printers with the same device name.
Note:
34 Océ 9400-II User Manual