Programming Media Setti Ngs49 - Oce 9400-I User Manual

Programming media settings
If you have inserted a new roll with a different material or of a different width,
you must program the new roll specifications. These specifications are:
width of the material.
You can select A0 (841 mm), A1 (594 mm), A2 (420 mm), A3 (297), E (34"),
D (22"), C (17"), B (11"), E+ (36"), D+ (24"), C+ (18"), B+ (12"), 30", 500
mm, 700 mm and B1 (707 mm). The default is 36".
type of media.
auto roll selection:
If you activate this function, the machine automatically selects the correct
roll based on the size of the original.
auto roll switch:
If you activate this function, the machine automatically switches to the other
roll if the one in use becomes empty. The switch only takes place if the media
type and material width are the same for both rolls.
Materials
Plain paper
Plain paper
ECO papers
Translucent paper
Transparencies
Polyester film
PPC film
PPC Type C Polyester film
Clear polyester film
Contrast film
Polyester film *
Vellum
Vellum
Contrast paper
Fluor paper
Pastel paper
** The sticker on this polyester roll indicates '4 mil', but the thickness is
really 4.5 mil.
(Re)load media and toner
Weight
20 lb. bond
27 lb. bond
20 lb. bond
15 lb. bond
20/21 lb.
24/25 lb.
27/28 lb.
3.5 mil
3.5 mil
3.5 mil
4 mil
3.5 mil
4.5 mil
20 lb
16 lb
34 lb
27 lb
20 lb
Media type setting
paper
paper
paper
translucent
transp <= 24 lb.
transp <= 24 lb.
transp 27 lb
film < = 4 mil
film < = 4 mil
film < = 4 mil
film < = 4 mil
film < =4 mil
film 4.5 mil
vellum
vellum
paper
paper
paper
49