Buttons; Display - Oce 9400-I User Manual

Buttons

'Program'
this mode, the user can use next/select' the 'previous' and
step through the menu.
Press Program' again. If no action takes place for 1 minute in Program mode,
the machine will return to the status mode.
If you press the Program button while the printer is printing, the LED
Note:
above the program button flashes. As soon as the printing process is ready, you
will automatically enter the program mode. Keep in mind that the printer will
not print in Program mode.
'Next/select'
present, enter a lower-level menu.
'Previous'
structure.
Browse buttons
at the same menu level, or to display the next or previous option from the
option list.
'Cancel/continue'
continue after an operator-recoverable error.

Display

The two-line LCD display provides status information on print jobs in normal
mode, and displays menu items in Program mode.
The following messages may appear during normal operation:
Status messages
'PROCESSING' etc.
Warning messages
message; however, it is likely that the print quality will not be optimal, e.g.
'REFILL TONER'.
12 Océ 9400-II User Manual
To activate the program mode and to enter the top level menu. In
To select an option or a setting in the menu. Or, if a submenu is
Pressing this button takes you one level higher in the menu
These two buttons are used to select another mode
or
This button is used to cancel the present print job or to
indicates the actual status of the printer, e.g. 'READY',
the printer will continue to operate during a warning
or buttons to