Oce 9400-I User Manual page 28

UTP (unshielded twisted pair) cable looks much like standard phone cable.
The cable should have RJ45 plugs.
If you are using the Ethernet port, you will need to configure a list o
parameters. All required parameters are described in the following procedures.
Connecting Etherne
Connect one end of the Ethernet cable to the computer's Ethernet port.
1
Connect the other end to the printer's Ethernet port (see f igure8).
2
[8] Ethernet port
Setting up the TCP/IP protoco
You must configure the printer IP address, subnet mask and default gateway IP
address (consult your local network administrator). Each of these fou
addresses is composed of 4 numeric fields ranging from 0 to 255. For example:
194.2.66.146 or 255.255.255.0. The menu presents these fields in the
following order: field 0, field 1, field 2, field 3.
Press 'Program' to enter the main menu.
1
Select the 'C
2
Press 'next/select' to enter the '
3
Select the 'C
4
Press 'next/select' to enter the '
5
Select the '
6
Press 'next/select' to enter the '
7
Select the '
8
Press 'next/select' to enter the '
9
Select the '
10
Press 'next/select' to enter the '
11
Enter the '
12
28 Océ 9400-II User Manual
RJ45
' menu using th
ONFIGURATION
' menu using th
ONNECTIONS
' item using the
ETHERNET
' menu using th
IP ADDRESS
0' menu using th
FIELD
0' number of your '
FIELD
e or
' menu.
CONFIGURATION
e or button.
' menu.
CONNECTION
or button.
' menu.
ETHERNET
e or button.
' menu.
IP ADDRESS
e or button.
0' menu.
FIELD
' using the
IP ADDRESS
button.
o r button.