Oce 9400-I User Manual page 38

Press 'next/select' to enter the '
5
Select the '
6
Press 'next/select' to enter the '
7
Select the required bitmap partition
8
Press 'next/select' to confirm the required partition.
9
Press 'Program' to exit the main menu.
10
Activating the new bitmap buffer siz
Turn the printer off and then on again.
1
If you do not restart the printer, the new memory allocation is not
Note:
activated. Any print data in the printer's memory will be lost when you turn off
the printer.
RAM
64
128
256
The presented memory percentages are only an indication and may vary
Note:
slightly from one firmware release to another.
If you experience difficulties printing your files with these settings, you can try
to change the value, taking into account the following guidelines:
Increasing the bitmap buffer size decreases the processing area size.
The size of the processing area determines your ability to process complex
files (e.g. larger number of vectors).
A high-percentage allocation to the bitmap partition allows printing of long
plots without windowing.
A low-percentage allocation to the bitmap partition enhances your ability to
process very complex files (vector and raster).
38 Océ 9400-II User Manual
' item using t
BITMAP BUFFER
Min
31 % (E+ paper)
16 % (E+ paper)
9 % (E+ paper)
' menu.
BUFFER
he or button.
' menu
BITMAP BUFFER
using the or button
Max
71 % (2.92 meters [74"] on E+
paper)
78 % (6.41 meters [163"] on E+
paper)
84 % (13.82 meters [351"] on E+
paper)