Remove the roll holder from the drawer (see figure 10 on page42)
2
[10] Removing the roll holder from the drawer
While pressing the knob, remove the empty core from the roll holder (see
3
figur e11).
Slide the roll holder into the new roll of material while pressing the knob (see
4
figur e11).
Make sure that the knob is to the right, and that paper appears as shown in
figure 11.
[11] Pressing the knob
While pressing the knob, align the roll with the appropriate lines on the roll
5
holder. This line must be completely visible.
42
Océ 9400-II User Manual