Clearing Paper Jams - Oce 9400-I User Manual

Clearing paper jams

When a jam occurs, a message appears on the operating panel. If paper
misfeeds occur frequently, make sure that:
The roll(s) are loaded correctly and the media is fed as indicated.
The correct media is used (see 'Copy material that can be used' o n page135).
No scraps of material are blocking the paper path.
Clearing paper jams in the media feed section
Switch the printer off.
1
Open the cover of the roll unit.
2
Lower the feed table, using the two catches on the front of the printer
3
underneath the feed table (see figure 33).
[33] Lowering the feed table
Remove the jammed material.
4
Check thoroughly to make sure that no scraps of material remain.
Note:
Close the feed table.
5
Close the cover of the roll unit.
6
Turn the printer on.
7
120 Océ 9400-II User Manual