Printing Using The Manual F Eed48 - Oce 9400-I User Manual

Printing using the manual feed
Manual feed can be selected in two ways:
via remote control commands added to the print file (by means of Plot
Director, drivers (see 'Use of the Scan-to-File option' on page 7 5 ).
by changing the 'MEDIA MODE' in program mode.
If the user wants to use manual feed, he or she must:
program the media settings on the printer; see 'Programming media settings'
1
on page 4 9 .
send the file.
2
wait until the message 'FEED SHEET' appears in the printer display.
3
feed a sheet of paper into the printer in portrait orientation.
4
hold the paper until the engine pulls in the first part of the sheet.
5
If the user has selected manual feed in a print file, the printer will ask the user,
via the operating panel, to feed the sheet into the printer at the moment this job
is processed. There will be a user-selectable time-out between 30 and 300
seconds for feeding the sheet. The default time-out is 60 seconds. See Setting
the time-out for manual feed' on pa ge51. If the user does not feed the sheet
within this time, the job is canceled and the next job is processed.
Inserting print material into the manual fee
Feed the print material centrally into the feed table in accordance with the
1
guidelines (see figur e18).
The minimum length of the print material is 420 mm (16.5").
Note:
[18] Manual feed
48 Océ 9400-II User Manual