Defining Connectivity Settings; Centronics; Scsi; Ethernet - Oce 9800 User Manual

Defining connectivity settings

The Océ 9800 can have several types of interfaces. During installation, the Océ
service engineer will define your interface settings. If communication
parameters on your host system will change in time, you can use the system
administrator mode to define new connectivity settings.
You can change serial, centronics, and SCSI communication parameters.

Centronics

Defining centronics
Open the 'Connection' card in the 'Connect' section.
1
Press the 'Select connection' button and select Centronics.
2
Specify normal or high speed.
3
When ready, quit the system administrator mode.
4

SCSI

Defining SCSI
Open the 'Connection' card in the 'Connect' section.
1
Press the 'Select connection' button and select SCSI.
2
Specify the appropriate SCSI-id, using the numeric buttons.
3
If required, press the 'SCSI terminator' button to activate this option (black
4
background).
When ready, quit the system administrator mode.
5

Ethernet

Defining Ethernet
Open the 'Connection' card in the 'Connect' section.
1
Press the 'Select connection' button and select Ethernet.
2
80 Océ 9800 Printer User Manual