Configuring The Window Size For Rsvp Neighbor Authentication - Cisco ASR 9000 Series Configuration Manual

Implementing RSVP for MPLS-TE
Command or Action
Step 3 life-time seconds
Example:
RP/0/RSP0/CPU0:router(config-rsvp-nbor-auth)#
life-time 2000
Step 4
Use the commit or end command.
Related Topics
Security Association, on page 71
RSVP Authentication Global Configuration Mode: Example, on page 102

Configuring the Window Size for RSVP Neighbor Authentication

Perform this task to configure the RSVP neighbor authentication window size to check the validity of the
sequence number received.
SUMMARY STEPS
1. configure
2. rsvp neighbor IP address authentication
3. window-size N
4. Use the commit or end command.
OL-28381-02
Purpose
Controls how long RSVP maintains security associations with other
trusted RSVP neighbors. The argument specifies the
seconds
commit—Saves the configuration changes and remains within the
configuration session.
end—Prompts user to take one of these actions:
• Yes— Saves configuration changes and exits the configuration
• No—Exits the configuration session without committing the
• Cancel—Remains in the configuration mode, without
Cisco ASR 9000 Series Aggregation Services Router MPLS Configuration Guide, Release 4.3.x
Configuring RSVP Neighbor Authentication
Length of time (in seconds) that RSVP maintains idle security
associations with other trusted RSVP neighbors. Range is
from 30 to 86400. The default value is 1800.
session.
configuration changes.
committing the configuration changes.
95