Wiring Map For Serial Cable; Table 3-1 Serial Cable Wiring - Edge-Core ES3526XA Installation Manual

3
Installing the Switch

Wiring Map for Serial Cable

2 RXD (receive data)
3 TXD (transmit data)
5 SGND (signal ground) ------------------------------ 5 SGND (signal ground)
No other pins are used.
The serial port's configuration requirements are as follows:
• Default Baud rate—9,600 bps
• Character Size—8 Characters
• Parity—None
• Stop bit—One
• Data bits—8
• Flow control—none
3-8

Table 3-1 Serial Cable Wiring

Switch's 9-Pin
Serial Port
<----------------------------
-----------------------------> 2 RXD (receive data)
Null Modem
3 TXD (transmit data)
PC's 9-Pin
DTE Port