Table of Contents
Advertisement
4
Command Line Interface
show map ip dscp
This command shows the IP DSCP priority map.
Syntax
show map ip dscp [interface]
interface
• ethernet unit/port
- unit - Stack unit
- port - Port number. (Range: 1-28)
• port-channel channel-id (Range: 1-12)
Default Setting
None
Command Mode
Privileged Exec
Example
Console#show map ip dscp ethernet 1/1
DSCP mapping status: disabled
Port
DSCP COS
--------- ---- ---
Eth 1/ 1
0
Eth 1/ 1
1
Eth 1/ 1
2
Eth 1/ 1
3
. .
.
Eth 1/ 1
61
Eth 1/ 1
62
Eth 1/ 1
63
Console#
Related Commands
map ip dscp (Global Configuration) (4-214)
map ip dscp (Interface Configuration) (4-215)
59. Stacking is not supported in the current firmware.
4-218
59
. (Range: 1-1)
0
0
0
0
0
0
0
Advertisement
Table of Contents
