Drop Down Menus; File; Exit; Tools - Extron electronics SSP 7.1 User Manual

SSP 7.1 Setup and Control Software, cont'd

Drop down menus

The menu bar at the top of the window provides additional
tools and options. The three top level headings are File,
Tools, and Help (see figure at right).

File

The File menu has a single option:

Exit

Clicking on Exit shuts down the program.
Changes to the configuration of the SSP 7.1 are saved as they
are made. Exiting the program will leave all changes from that session in effect.
To restore all values to factory defaults, use the Reset Device button in the Factory
Defaults section of the Advanced tab.

Tools

The Tools menu has a single option:

Trace Window

The Trace Window command opens
the Trace Window (see figure at
right). The Trace window displays
all commands and data sent from the
computer to the SSP 7.1 unit in the
upper pane, and all responses and
data sent from the SSP 7.1 unit to the
computer.
This window is useful to qualified
service personnel for some
troubleshooting situations.
The Clear Data button clears data from
both panes.
The Close button, shuts down the
window. Data is still being sent
between the computer and the sound
processor and that data is still available
for viewing by reopening the window.
5-20 5-20 SSP 7.1 • Setup and Control Software