SAFETY RULES AND OPERATING INSTRUCTIONS
Reverse or Motion Alarm (Optional)
The reverse alarm is located in the electronics compartment mounted in the speed control panel enclosure.
The reverse alarm is activated when the Key switch is in the "ON" position and the Forward-Off-Reverse
switch is in the reverse position. The alarm makes a repeated audible sound.
The motion alarm is the same alarm that is used for the reverse alarm, only it operates in both the
forward and reverse directions.
Seat Interlock Switch
A switch located under the driver's seat disables the power to the vehicle
when the driver leaves the seat. The driver must be seated for the vehicle to
operate.
Whenever the driver leaves the vehicle, the driver should turn the key-switch
off, place the forward-off-reverse switch in the center "OFF" position, and set
the park brake.
The seat interlock switch is only one part of the vehicle safety system.
The interlock switch should not be relied upon as the only safety
feature used to disable or disengage this vehicle. Doing so could result
in unexpected movement of the vehicle causing severe bodily injury
and/or property damage.
Safety Rules
Page 9