Taylor-Dunn C0-425-36 Operation, Troubleshooting And Replacement Parts Manualooting And Replacement Parts Manual page 30

SAFETY RULES AND OPERATING INSTRUCTIONS
Maintenance monitor:
Operation: The SMD notifies the operator 10-hours (standard) before a scheduled maintenance is due.
During this warning period, the meter will continue to alert the operator. This should allow sufficient time
for the operator to schedule the maintenance that is due, with minimal down time. If the scheduled
maintenance is not performed before the warning period elapses, then the vehicles maximum speed will
be significantly reduced.
Display showing Maintenance and
Wrench icons
Warning period: The warning starts when the Maintenance Indicator is
ON and the Wrench icon is flashing. The Wrench icon will continue to
flash until the warning time has expired.
Maintenance Due: Once the warning has expired and the maintenance
is due, the Wrench icon will stop flashing and remain ON. Additionally,
the vehicles maximum speed will be significantly reduced until the
maintenance is performed and the display is reset. The display should
only be reset by an authorized technician. Refer to the
section for information regarding tools required to reset the Smart View
Display.
Safety Rules Page 12
Illustrated parts