Taylor-Dunn C0-425-36 Operation, Troubleshooting And Replacement Parts Manualooting And Replacement Parts Manual page 61

12. Find the center position of the steering shaft:
A. Turn the steering shaft all of the way in one direction.
B. While counting the rotations, turn the steering shaft all of the way in the opposite direction.
C. Turn the steering shaft 1/2 the number of turns in the original direction.
13. While rotating the input shaft back and forth through its centered position, adjust the gear lash
adjusting screw so that there is a slight drag as the steering gear is rotated through its centered
position.
14. While holding the gear lash adjusting screw so that it cannot turn, tighten the gear lash adjusting
screw jam nut.
15. Reconnect the main battery connector.
16. Remove the blocks from behind the wheels.
17. Release the parking brake and test drive the vehicle.
Maintenance, Service, and Repair
R
Steering Page 7