Replacing The Brushes Or Armature Bearing; Motor Inspection - Taylor-Dunn C0-425-36 Operation, Troubleshooting And Replacement Parts Manualooting And Replacement Parts Manual

REPLACING THE BRUSHES OR ARMATURE BEARING

NOTE: It is recommended that all four brushes be replaced as a set.
NOTE: The motor must be disassembled to replace the brushes or the
NOTE: The motor must be removed from the vehicle for this procedure.
Motor Inspection-Disassembly
bearing. Refer to
information on taking the motor apart.
Transmission Service
Refer to
removing the motor.
Motor
Motor Service
section for
section for information on
Page 7