Accelerator Pedal; Foot Brake Pedal; Battery Disconnect Switch; Park Brake - Taylor-Dunn C0-425-36 Operation, Troubleshooting And Replacement Parts Manualooting And Replacement Parts Manual

SAFETY RULES AND OPERATING INSTRUCTIONS

Accelerator Pedal

The accelerator pedal is located to the right of the brake pedal. It controls
the speed of the vehicle and operates similar to the accelerator pedal in an
automobile. Depress the pedal to increase speed and release the pedal to
decrease speed.

Foot Brake Pedal

The foot brake pedal, is located to the right of the steering column, it is for
operation with the right foot only. It works similar to the brake in an automobile.
Applying pressure to the brake pedal slows the vehicle according to the
amount of pressure applied. Relieving pressure from the pedal releases
the braking action.

Park Brake

The parking brake is actuated with a hand lever, which is located to the right
of the driver. To set the parking brake, push down on the brake pedal and
pull the lever up until it locks. To release the park brake, depress the foot
brake pedal, pull up on the park brake handle, push the release button, and
lower the handle.

Battery Disconnect Switch

The battery disconnect switch is located to the right of the driver seat (red
knob). To disconnect the battery from the control system, push down on the
knob. Pull up on the knob to reconnect the battery.
Safety Rules Page 8