Resetting The Smart View Display - Taylor-Dunn C0-425-36 Operation, Troubleshooting And Replacement Parts Manualooting And Replacement Parts Manual

ITEM # PART #
1 71-039-11
74-009-49
2
74-010-00*
3 71-039-02
4 71-120-10
5 71-120-90
6 94-304-23
Not shown 97-211-20
Not shown 88-065-09
* - If your vehicle was not originally equipped with the Smart View

Resetting the Smart View Display

The meter should only be reset after the preventative maintenance has been performed. Taylor-Dunn
part number 62-027-40 Hand set (available with instructions as part number 62-027-61) must be used to
reset the meter. Refer to the handset instructions (D0-100-08) for information on the procedure to reset
the display.
Instrument Panel
DESCRIPTION
Light switch
Hour meter/Battery status meter
Smart view display*
Forward and Reverse switch
Key switch
Key
Dash panel
1/4NC Blind nut (dash mounting)
1/4NC x 3/4 Truss head machine screw (dash mounting)
display, then the Sevcon speed control must be reprogrammed
before the display will function.
If you have the Smart View display and wish to have the
maintenance feature turned on, then the Sevcon speed control
must be reprogrammed.
To reprogram the Sevcon speed control, the speed control must
be returned to the factory. Contact your local Taylor-Dunn
for more information.
The Smart View Display will only work with the Sevcon control
system.
Illustrated Parts
Illustrated Parts
® distributor
Page 35
QTY
1
1
1
1
1
1
1
4
4
®