Transmission Assembly; Remove And Install - Taylor-Dunn C0-425-36 Operation, Troubleshooting And Replacement Parts Manualooting And Replacement Parts Manual

Maintenance, Service, and Repair

TRANSMISSION ASSEMBLY

Remove and Install

6. Disconnect the motor cables.
7. Disconnect the park brake cable from the brake
arm and the swing arm mount.
8. Disconnect the brake hose from the t-fitting on
the swing arm.
1. Make sure the key-switch is in the "OFF" position, then remove
the key.
2. Place the forward-reverse switch in the center "OFF" position.
3. Set the park brake.
4. Place blocks under the front wheels to prevent vehicle movement.
5. Disconnect the main positive and negative cables at the batteries.
Transmission Page 8