Front Axle Disassembly; Replace The King Pins And Bushings; Replace The Steering Knuckle - Taylor-Dunn C0-425-36 Operation, Troubleshooting And Replacement Parts Manualooting And Replacement Parts Manual

Maintenance, Service, and Repair

FRONT AXLE DISASSEMBLY

Disassembling and reassembling involves removing and replacing the left and right steering knuckles
and king pin bushings. Refer to the following sections for information regarding these procedures:

Replace the Steering Knuckle

Replace the King Pins and Bushings

NOTE: The front axle does not have to be removed unless the axle beam
must be replaced. Refer to
Installation
for information regarding removing the front axle.
View from rear
Front Axle
Front Axle Removal and
Page 6