Options Menu - GE Interlogix Concord Security System Installation Instructions Manual

Latchkey Report
(030nnn5 where nnn=user
number 00-229)
This setting determines whether
or not the user code causes a
latchkey report to be sent to a
pager when the code is used to
change arming levels.
Partition Master
(partition 1: 0310, partition 2: 0311)
The Partition Master Code provides access to all system
operations and user programming for a single partition.
Note
You must be "in" the partition of the partition master code
you wish to change.
System Master (0320)
The System Master Code provides
access to all system operations and user
programming.
Downloading (040)
When this setting is on, the panel can communicate with Tool-
®
Box software for programming the system from off-site.
Note
For this feature to work, the panel must be connected to a phone line
and be programmed with REMOTE ACCESS on, with a Downloader
phone number, and with a Downloader code.
Silent Arming (041)
This setting determines whether or not the panel sounds status
beeps from sirens and the touchpad when the system is armed.
Note
When this feature is on, the user does not need to press 5 (SILENT)
before arming the system to prevent status sounds. When SIA False
Alarm Reduction (0004) is ON, this option is disabled.
61
User Codes-Reg. User Codes-User NNN (Defaults: 00-05 = on, 06-229 = off)
¾
To assign the Latchkey Report attribute to user codes:
1. With the display showing
.
CODES
and
2. Press # the display shows
3. Press A or B to select the desired user number, then press #. The display shows
.
nnn - nnnn
4. Press A or B until the display shows
5. Press 1 (off) or 2 (on). The display flashes the entered setting. Press # and the display
shows the new setting.
¾
To change the System Master Code:
1. With the display showing
shows
SYSTEM MASTER CODE
and
2. Press #
3. Enter a new 4-digit code. The display flashes the entered code. Press # and dis-
play shows the new code.

Options Menu

The menu lets you set up the system for downloading and silent arming. You can also
OPTIONS
adjust alphanumeric touchpad display brightness from this menu.
, press # and the display shows
USER CODES
(first available user number).
USER nnn
LATCHKEY OFF/ON
User Codes-Partition Master Code (Default = none)
¾
To change the Partition Master Code:
1. With the display showing
until the display shows
and
2. Press # the display shows
3. Enter a new 4-digit code. The display flashes the entered code.
Press # and the display shows the new code.
User Codes-System Master Code (Default = 1234)
, press # then A or B until the display
USER CODES
.
the display shows
SYSTEM MASTER nnnn
¾
To turn Downloading off or on:
1. Press A or B until the display shows
2. Press #, then A or B until the display shows
LOADING OFF/ON
3. Press 1 (off) or 2 (on). The display flashes the entered
selection. Press
¾
To turn Silent Arming off or on:
1. Press A or B until the display shows
2. Press #, then A or B until the display shows
ARMING OFF/ON
3. Press 1 (off) or 2 (on). The display flashes the entered
selection. Press
REGULAR USER
(current setting).
, press # then A or B
USER CODES
.
PARTITION MASTER CODE
(current code).
PARTITION nnnn
(current code).
Options (Default = on)
OPTIONS
(current setting).
# and the display shows the new setting.
Options (Default = off)
OPTIONS
(current setting).
# and the display shows the new setting.
USER
.
DOWN-
.
SILENT
Concord