User Codes Menu - GE Interlogix Concord Security System Installation Instructions Manual

Time (020)
This setting lets you adjust the panel clock to the cor-
rect time. The panel uses a 24-hour clock. For exam-
ple, to set the time to 4:17
Date (021)
This setting lets you adjust the panel calendar to
the correct month, day, and year.
User NNN (030nnn0 where
nnn=user number 00-229)
User codes perform basic arming
and disarming functions. The sys-
tem allows up to 230 user codes
(user numbers 00–229). User
numbers that show **** indicate
no code is currently programmed
for that user number.
59
. ., enter 1617.
P M
¾
1.
2.

User Codes Menu

The USER CODES menu lets you program/change regular user access codes, partition master
codes, and the system master code. You can enter up to 230 separate user codes, allowing up to
230 different "users" access to the security system. You can also specify whether or not a specific
user is able to perform specific actions like, bypass sensors or test the system.
¾
To program Regular User Codes:
1. With the display showing
.
CODES
and
2. Press #
3. Press A or B to select the desired user number, then press #. The display shows
nnn - nnnn.
4. With the desired user number displayed, enter a 4-digit user code. The display flashes
the entered code. Press # and the display shows
¾
To delete Regular User Codes:
1. With the display showing
.
CODES
and
2. Press #
3. Press A or B to select the desired user number/user code you want to delete (if it is not
already displayed), then press #. The display shows
4. Enter the system or partition master code. The display flashes the entered code. Press
# and the display shows
¾
To set the Time:
1. With the display showing
shows (current time).
TIME hh:mm
2. Enter the correct time (0000–2359). The display flashes the
entered time. Press # and the display shows the new time.
To set the Date:
With the display showing
the display shows
DATE nn/nn/nn
Enter the correct month (01–12), day (01–31), and year (00–99). For
example, enter 090100 for September 1, 2000. The display flashes
the entered date. Press # and the display shows the new date.
User Codes-Reg. User Codes-User NNN (Default = none)
, press # and the display shows
USER CODES
the display shows nnn (first available user number).
USER
, press # and the display shows
USER CODES
the display shows nnn - nnnn (first available user number).
USER
nnn --
USER
****
Time and Date (Default = 00:00)
, press # and the display
TIME AND DATE
Time and Date (Default = 01/01/00)
, press #, then A or B until
TIME AND DATE
(current date).
nnn - nnnn (new code).
USER
nnn - nnnn.
USER
(no code).
REGULAR USER
USER
REGULAR USER
Concord