GE Interlogix Concord Security System Installation Instructions Manual page 42

Call Wait Cancel (02009)
This feature lets you set up a dialing prefix to disable the call waiting
feature before the panel makes its first dialing attempt to any pro-
grammed central monitoring station or downloader phone number. The
prefix can be up to eight digits.
To enter pauses, press C.
To enter *, press and hold 7 for one second.
To enter #, press and hold 9 for one second.
DO NOT change this option from its default if the customer doesn't
!
have call waiting. Verify with the customer that they have call wait-
ing with their phone service provider before changing this option
from its default. Changing this option from its default without call
waiting will prohibit the panel from calling the central station.
Caution
Dial Tone Detect (02010)
When this setting is on, the panel begins dialing as soon as it detects a
dial tone. When this feature is off, the panel begins dialing a few sec-
onds after seizing the phone line.
Note
There is no Dial Tone Detect on the last dialing attempt.
Local Phone Control (partition 1: 0210, partition 2: 0220)
When this feature is on, the panel can be accessed from a phone on the
premises.
Remote Access (partition 1: 0211, partition 2: 0221)
When this setting is on, the panel can be accessed from an off-site
phone.
37
The following sections describe the phone option settings that appear under
A Phone Interface/Voice module must be installed for the system to use the settings under
OPTIONS— PARTITION 1-2 .
Phone Options-Global (Default = none)
¾
To set up Call Wait Cancel:
1. With the display showing
(or current setting), enter the desired prefix.
__
The display flashes the entered setting.
2. Press # and the display shows the new setting.
¾
To delete the Call Wait Cancel prefix:
1. With the display showing
(or current setting), press D.
__
Phone Options-Global (Default = on)
¾
To set up Dial Tone Detect:
1. With the display showing
(current setting), press 1 (off) or 2
OFF/ON
(on). The display flashes the entered setting.
2. Press # and the display shows the new setting.
Phone Options-Partition 1-2 (Default = on)
¾
To set up Local Phone Control:
1. With the display showing
(current setting), press 1 (off) or 2
OFF/ON
(on). The display flashes the entered setting.
2. Press # and the display shows the new setting.
Phone Options-Partition 1-2 (Default = on)
¾
To turn Remote Access off or on:
1. With the display showing
(current setting), press 1 (off) or 2
OFF/ON
(on). The display flashes the entered setting.
2. Press # and the display shows the new setting.
CALL WAIT CANCEL
CALL WAIT CANCEL
DIAL TONE DETECT
PARTITION 1-2 .
PHONE
LOCAL PHONE CTRL
REMOTE ACCESS
Concord