GE Interlogix Concord Security System Installation Instructions Manual page 39

Open/Close Rpts (pager 1: 0134, pager 2: 0144, pager 3:
0154, pager 4: 0164, pager 5: 0174)
This setting determines whether opening and closing reports are sent to a
pager. When turned on, the panel sends a closing report when the system
is armed and an opening report when the system is disarmed.
Note
To use this feature, the opening reports and closing reports settings under the
menu must be turned on for that partition.
REPORTING
Latchkey Reports (pager 1: 0135, pager 2: 0145, pager
3: 0155, pager 4: 0165, pager 5: 0175)
This setting determines whether the panel reports to a pager when the
system is armed or disarmed, according to latchkey time scheduling.
Streamlining (pager 1: 0136, pager 2: 0146, pager 3:
0156, pager 4: 0166, pager 5: 0176)
This setting determines whether the panel includes (off) or excludes
(on) the account number when reporting to a pager.
Ptn Assignment (pager 1: 0137, pager 2: 0147, pager 3:
0157, pager 4: 0167, pager 5: 0177)
This setting determines the partition that reports to a pager. Both parti-
tions can be assigned to report to a single pager.
Phone Number (0180)
Use this setting to enter the phone number of an off-site computer that
can be used to program the panel through the phone line. Phone numbers
can be 1 to 24 digits long, including pauses or * and # characters.
Note
Call-waiting services should be disabled to prevent interrupting panel commu-
nication to the downloader. To program a dialing prefix that disables call-wait-
ing, see the Call Wait Cancel setting under the menu
GLOBAL
.
To enter pauses, press C.
To enter *, press and hold 7 for about two seconds.
To enter #, press and hold 9 for about two seconds.
Concord
The following describes how to program the phone settings that appear under
PHONE .
PHONE OPTIONS—
Phones-Pager Phone 1-5 (Default = off)
¾
To turn Opening/Closing Reports off or on:
1.
With the display showing
(current setting), press
OFF/ON
(on). The display flashes the entered setting.
2. # and the display shows the new setting.
Press
Phones-Pager Phone 1-5 (Default = on)
¾
To turn Latchkey reports off or on:
1. With the display showing
(current setting), press 1 (off) or 2
OFF/ON
(on). The display flashes the entered setting.
2. Press # and the display shows the new setting.
Phones-Pager Phone 1-5 (Default = on)
¾
To turn Streamlining off or on:
1. With the display showing
(current setting), press 1 (off) or 2 (on). The
ON
display flashes the entered setting.
2. Press # and the display shows the new setting.
Phones-Pager Phone 1-5 (Default = 1)
¾
To set up Partition Assignments for pager
reporting:
1. With the display showing
(current setting), press 1 or 2 to select parti-
12
tion 1 or 2 (press 1 and 2 to select both parti-
tion 1 and 2). The display flashes the entered
setting.
2. Press # and the display shows the new setting.
Phones-Downloader Phone (Default = none)
¾
To program a downloader phone number:
1. With the display showing
rent number), enter the desired phone number.
The display flashes the entered number.
2. Press # and the display shows the new setting.
¾
To delete a downloader phone number:
1. With the display showing
rent number), press D to erase the number. The
display shows
PHONE NUMBER_
OPEN/CLOSE RPTS
1 (off) or 2
LATCHKEY RPTS
STREAMLINING OFF/
PTN ASSIGNMENT 1/2/
DOWNLOADER
(cur-
PHONE NUMBER
(cur-
PHONE NUMBER
.
34