Controller Board Access Shield Removal; Fuser Drive Motor Removal - Lexmark MX81 series Service Manual

Controller board access shield removal

1
Remove the left cover. See
2
Loosen the eight screws (A) securing the controller board access shield to the machine.
3
Move the controller board access shield toward the front of the machine to remove it.

Fuser drive motor removal

1
Remove the rear door. See
2
Remove the fuser. See
3
Remove the imaging unit from the machine.
"Left cover removal (MX71x)" on page
"Rear door removal" on page
"Fuser removal" on page
Repair information
296.
302.
340.
374
7463