Configuring A Ping - Motorola RFS Series System Reference Manual

• None - no impact.
6. Select the message deployed when a bug is raised.
The What Kind of message should be seen
returned messages while debugging. Move your mouse pointer over a message checkbox for a message
description.
a. Click the Advanced
Select the checkboxes corresponding to the message types you would like to receive.
Each message category is enabled by default. Click the
the available message categories.
b. Click the All Messages
c. Click the No Messages
7. Click the Apply
8. Click the Revert

8.6 Configuring a Ping

The switch can verify its link with other switches and associated MUs by sending ping packets to the
associated device. Use a ping to test the connection between the switch and IP destinations you specify. For
each ping packet transmitted, statistics are gathered for the round-trip time (RTT) between the switch and
its destination. The RTT is the time (in milliseconds) for a ping packet to travel from the switch to its target
destination and back again. This number can vary significantly due to the random nature of packet routings
and random loads on the switch and its destination.
To view the switch's existing ping configuration:
1. Select Diagnostics
button to display the entire list of message categories when bugs are raised.
button to select all the message categories.
button if you do not want to select any of the message categories.
button to save the changes you have applied within this screen.
button to revert back to the last saved configuration.
> Ping from the main menu.
field allows you to select a range of parameters for
Simple button to minimize this area and hide
8-19
Diagnostics