Programming System Options; Printing The System Options - Olympia CM 940-F Operating And Programming Manual

6.15.2

Programming system options

Tip: Before starting with programming, take your time to consider how you want to programme the individual features and
note down the 2-digit status number which needs to be entered.
1. Set the key to PRG.
2. Select programme number 13
(see Chapter 6.1.2).
Press the ┣CASH┫ key to confirm
3.
the selection.
The first system option and its current
status appear in the display.
4. Enter the number of the system
option to be programmed, e.g.
13.
Use the ┣↑┫ and ┣↓┫ keys to
5.
move to the [ ] input area.
6. Enter the required 2-digit status
number, e.g. 51 (to switch off the
key tone).
Press the ┣CASH┫ key to confirm
7.
the input.
8. Conclude programming by press-
ing the ┣SUB-TOTAL┫ key.
6.15.3

Printing the system options

1. Set the key to PRG.
2. Programme number 90 is
automatically selected
(see Chapter 6.1.2).
Press the ┣CASH┫ key to confirm
3.
the selection.
The display shows what can be
printed.
Use the ┣↑┫ and ┣↓┫ keys to
4.
select P-REGISTER.
Press the ┣CASH┫ key to confirm
5.
the selection.
Olympia 2011
Cash Register CM 940-F / 941-F / 942-F
Page 78
Input
=P REGISTER
[32]
=P REGISTER
[10]
[51]
Input
=SETTINGS-PRG
90.PRINT PROG DUMP
=PRINT PRG DUMP
DEPARTMENT
PLU
LINK PLU
CLERK
TENDER MEDIA
...
=PRINT PRG DUMP
P REGISTER
Specifications subject to change without notice!
Display
1- 1=
STATUS NO.Mx-My
STATUS NO.Mx-My
STATUS NO.Mx-My
Display
-90=
– 1=
– 10=