Programming Tender Media Identification - Olympia CM 940-F Operating And Programming Manual

6.8

Programming tender media identification

The tender media defines the method of payment for a purchase. There are five different tender media.
The two most common tender media are already provided as keys on the keyboard:
┣CASH┫
●
┣CARD┫
●
The following tender media can also be set up on the keyboard:
┣CHEQUE┫
●
┣CREDIT 1┫
●
┣CREDIT 2┫
●
The names of the tender media are used on the receipts and cash register reports and can be reprogrammed, if
necessary:
Tender medium 4 "CREDIT 2" should be renamed "XYZ".
Example:
1. Set the key to PRG.
2. Select programme number 08
(see Chapter 6.1.2).
Press the ┣CASH┫ key to confirm
3.
the selection.
4. Select the tender medium re-
quired: Switch between the vari-
ous tender media by pressing
the ┣CASH┫ key.
Use the ┣↑┫ and ┣↓┫ keys to
5.
access the input area.
Press the ┣CASH┫ key to confirm
6.
the selection.
7. Delete the existing text.
8. Enter the new tender name (text
input, refer to Chapter 6.2).
9. Conclude text input by pressing
the ┣CASH┫ key.
Note:
10. Conclude programming by press-
ing the ┣SUB-TOTAL┫ key.
Olympia 2011
Cash Register CM 940-F / 941-F / 942-F
The STATUS field is
reserved by the software
and cannot/must not be
reprogrammed!
Input
4x
2x then
3x then
4x then
Page 66 Specifications subject to change without notice!
Display
=TENDER MEDIA
[CASH ]
[ 00] STATUS
=TENDER MEDIA
[CREDIT 2
[CREDIT 2
CREDIT 2
X
XY
XYZ
[XYZ ]
1- 1=
4- 1=
]
]