Error Corrections/Voids Within The Table System; Order Type System - Olympia CM 940-F Operating And Programming Manual

8.8

Error corrections/Voids within the table system

Proceed as described in Chapter 7.9.2 to correct/cancel PLU registrations within the scope of the table system.
Three items were registered within the scope of the table system: PLUs 1 to 3 at fixed price 1. PLU 2 should
Example:
be cancelled (void).
1. Set the key to REG.
2. Enter the table number.
Press the ┣TABLE┫ key.
3.
Press the ┣VOID┫ key.
4.
Use the ┣↑┫ and ┣↓┫ keys
5.
to move to the item to be
cancelled.
Press the ┣EC┫ to clear the
6.
item selected.
Press the ┣CASH┫ key to
7.
return to the registration.
Press the ┣TABLE┫ key to
8.
exit from the table system.
The cash register prints a slip
for the correction.
8.9

Order type system

The order type system organises the printout of orders on the cash register. Order type names ensure that PLUs with the
same order number are printed on the same receipt. These order receipts are then printed out in succession. The order
type system is activated by the fact that the PLU was assigned an order type name during PLU programming (also
to Chapter 6.5.1.8).
Olympia 2011
Cash Register CM 940-F / 941-F / 942-F
Input
3. 3
2. 2
2. 2
Cancel
2
Display
1 50,00
1 100.00
0 0.00
-100,00
Page 139 Specifications subject to change without notice!
Receipt
TABLE1
Cancel
-1x 2
- - - - - - - - - - - - - - - - - - - - - - - - - - - - -
-100.00
refer