7.2.2
Registering a DP once using fixed price 2
A fixed price must have been programmed for price 2 (refer to Chapter 6.4).
●
If two fixed prices have been programmed (refer to Chapter 6.4), the cash register operates with fixed price 1 by
●
default.
If you press the ┣PRICE 2┫ key, the cash register operates using fixed price 2 for the duration of the registration until
●
you press the ┣PRICE 1┫ key to reactivate fixed price 1.
After concluding a registration process, price 1 is automatically reactivated!
●
7.2.2.1
Items were previously registered using price 2
Department 1 should be registered with price 2.
Example:
1.
Set the key to REG
2.
Press the relevant department key.
7.2.2.2
Items were previously registered using price 1
Department 1 should be registered with price 2.
Example:
1.
Set the key to REG
Press the ┣PRICE 2┫ key.
2.
3.
Press the relevant department key.
7.2.3
Registering a DP once without a fixed price
100.50 EUR should be registered to Department 1.
Example:
1.
Set the key to REG
2.
Enter the price (without decimal point, with
decimal places).
3.
Press the relevant department key.
7.2.4
Multiple DP registration
15 pieces of an item at a price of EUR 5.75 should be registered for Department 2.
Example:
1.
Set the key to REG
2.
Enter the quantity.
Press the multiplication key ┣ X ┫.
3.
4.
Enter the price (without decimal point, with
decimal places).
5.
Press the relevant department key.
The quantity of goods can a value between 1 and 9999.
Note:
Olympia
2011
Cash Register CM 940-F / 941-F / 942-F
Page 117
Input
Input
┣PRICE 2┫
Input
Input
Specifications subject to change without notice!