Navigating In The Departments; Programming Departments Using The Pc - Olympia CM 940-F Operating And Programming Manual

- Continued -
Defining department status:
Save and conclude department programming:
6.4.3

Navigating in the departments

Use the ┣↑┫ and ┣↓┫ keys to move to the top line and then press the ┣CASH┫ key several times to switch between the
●
DP memory locations.
By pressing the ┣DP-SHIFT┫ key, you can access the same position in the next PLU.
●
6.4.4

Programming departments using the PC

In order to programme departments using the PC programme, OLYMPIA ECR System provides the following input mask.
They way to use the mask is described in Chapter 5, in detail in Chapter 5.5.
Fig. 14
Important: *** After data has been transferred to the cash register, the software requires it is switched off briefly! ***
Olympia 2011
Cash Register CM 940-F / 941-F / 942-F
Page 42
00
01
Save...!!
Please Continue...
Specifications subject to change without notice!
STATUS
STATUS