Programming Tax Rates - Olympia CM 940-F Operating And Programming Manual

6.21

Programming tax rates

A maximum of 8 tax rates can be programmed.
The VAT tax rates 1 and 2 are preprogrammed at the factory to 19% and 7%, respectively.
Note:
Leave one tax rate without a tax assigned. This serves for neutral sales, e.g for cigarettes when a clerk
Tip:
purchases a pack from a machine as a service for a guest.
19.6% should be programmed for tax rate 3.
Example:
1. Set the key to PRG.
2. Select programme number 30
(see Chapter 6.1.2).
Press the ┣CASH┫ key to con-
3.
firm the selection.
4. Change the tax rate memory
location: Press the ┣CASH┫ key
until the required memory loca-
tion is displayed in the logo
message line.
Use the ┣↑┫ and ┣↓┫ keys to
5.
move to the RATE% input
area.
6. Use the digit keys to enter the
tax rate (with decimal point and
decimal places).
Press the ┣CASH┫ key to con-
7.
firm the input.
8. Conclude programming by
pressing the ┣SUB-TOTAL┫ key.
Important note: Assigning tax rates to the PLUs
The tax rate is assigned to the PLUs/departments when programming the departments. The tax totals can only be
calculated and printed on the receipt when the tax rate is actually assigned to the departments.
Olympia 2011
Cash Register CM 940-F / 941-F / 942-F
2x
Page 88
Input
TAX GROUP
19.00
TAX GROUP
00.00
0.00
19.60
Save...!!
Please Continue...
Specifications subject to change without notice!
Display
1- 1=
RATE%
3- 1=
RATE%
RATE%
RATE%